common issues with anchor clamp control cables is a type of cable product used for industrial control equipment, mainly for multiple functions such as control installation, connection of equipment, transmission of power, etc. A lot of information in the process of transmission is basically transmitted through the wires inside common issues with anchor clamp control cables, and thus is indispensable products in society. Then common issues with anchor clamp control cables WHAT principles should be followed for wiring?

common issues with anchor clamp control cables The following principles should be followed for wiring:

When guiding multi-core cables with a diameter of less than 10mm, to prevent them from loosening in the cable support chain, it is recommended to use guiding tubes as carriers.

2. common issues with anchor clamp control cables The cable in the chain must run smoothly in a straight line, cannot twist or curl, the cable must be turned open from the reel or drum, cannot be twisted and pulled out from the top.

3. Different cables: According to the principle of arranging cables in the cable protection chain, when flat cables and round cables are mixed and installed in the drag chain, the cables must be loosely installed between each other. Fasteners must be installed on both sides of the cable. Try to avoid installing round cables of different sizes on the side.

4. common issues with anchor clamp control cables The weight of the cables in the drag chain should be evenly distributed to avoid accidents caused by uneven weight during operation. The principle of cable distribution is that the heavier ones are on the sides and the lighter ones in the middle. All common issues with anchor clamp control cables must be securely fastened to one end of the drag chain so that the cable can be safely moved to the other end with other devices.

common issues with anchor clamp control cables https://www.huafengqp.com/news/Installation-and-use-of-Elevator-Control-Cable.shtml